Ender 3 Firmware update – TH3D

Edit: After completing the steps below, I found the following video with a USBASP that makes this process simpler (typical): Original Post: I decided to flash the TH3d firmware to my new Ender 3 – mainly for the thermal runaway protection and bed mesh levelling. I used the following videos to flash the firmware, with […]

Creality Ender 3

I decided to buy myself an early christmas present and bought an Ender 3. I found that the build process was mainly straight forward but tricky when it came to squaring the x axis against the z axis – I found using the top 2020 extrusion as a guide to get both sides level was […]